Underwater Kinetics HangAir Drying Hanger

Purchase Underwater Kinetics HangAir Drying Hanger

Underwater Kinetics HangAir Drying System
(Dries In Hours...Not Days!)

The UK HangAir Drying System uses a high-power waterproof fan to completely dry and ventilate suits of all kinds in mere hours. By maintaining equipment with the HangAir Drying System you can enjoy the comfort of a freshly dried suit before every excursion, ensure that your suit is blown clean and dry from the inside before storage, eliminate bad odors, and add years to the life of your equipment. The UK HangAir is molded from incredibly tough plastic resin and sports a steel hook which will comfortably support up to 100 pounds. Safe, low voltage power is supplied to the hanger fan through a tough 15 foot cord attached to a universal power 100/240 VAC wall adapter.

. Dries wetsuits, dry suits, turnout gear, rainsuits and heavy protective clothing in hours instead of days.
. High power waterproof fan pushes 120 cubic feet of air per minute
. Quick drying process retards the development of bad odors
. Safe low voltage power is supplied to the hanger fan through a 15 ft cord from a 100/240 VAC universal wall mounted adapter
. Wide shoulder construction prevents damaging creases in fabric
. Super strong nylon body with stainless steel hook supports 100 lbs
. Limited Lifetime Warranty
. 22.7 L x 15.1 W x 9 D inches
. DC Power Supply Available

Purchase Underwater Kinetics HangAir Drying Hanger

• SKU: 24061
• QUANTITY: EACH; 24/CASE; 12V DC POWER SUPPLY

Other products in the category Fire Equipment / Dry Gear Systems:

DryGear Pro Stations -- DryGear Turnout-Bunker Gear Dryer (Dry Your Firefighter Gear Fast & Easy!) The DryGear Professional is a powerful, efficient, and easy to use drying system. This system is completely safe for ALL turnout gear! The polyester vinyl tent enclosure ensures that the inside and outside surfaces of all equipment receives the maximum amount of exposure to moving air. Each station is able to accommodate a complete set of turnout gear including coat, pants, boots, helmet and gloves. This multi-station system is available in 3, 4, 6, 7, and 8 station configurations. . With Wheels . Exceeds NFPA 1851 recommendations . Hanger Tube Assemblies Include Suspender Hooks . Completely Dry the Inside and Outside of Gear in 4 to 5 Hours . Transparent Easy Access Roll-Up Front Cover . Manifold and Frame Surfaces have an Industrial Powder Coat Finish . Available with an Optional Caster Kit (Wheels) . Tested and Proven in the Field Since 1992 . Utilizes Forced Air Ventilation . No Mechanical Action To Damage Gear . System Operates With Or Without Heated Air . Heated Air Does Not Reach Gear-Degrading Temperatures . Built-In Heater Cutoff Protection . Special Shipping - Call For Quote . Safe For All Turnout Gear Control Panel Features: . Simple Operating Instructions . Six Hour Timer Switch . Air Only/Air & Heat Select Switch . Heater Selected Indicator Light Specifications: . Air Flow 40-50 Cubic feet per minute (CFM) per station . Electrical requirements 220 VAC, 30 Amps Dimensions: . 3 Station: 71 Inches Long, 84 Inches High, 37 Inches Wide, And 376 Pounds . 4 Station: 86 inches Long, 87 Inches High, 37 Inches Wide, And 404 Pounds . 6 Station: 121 Inches Long, 84 Inches High, 37 Inches Wide And 432 Pounds . 7 Station: 138 Inches Long, 87 Inches hHgh, 37 Inches Wide And 448 Pounds . 8 Station: 153 Inches Long, 84 Inches High, 37 Inches Wide And 464 Pounds . Motor (3,4, and 6 stations) Power : 3 HP Voltage : 208/230 Volts Current : 15.5/15.3 Amps Type : NEMA 56 . Motor (7 and 8 stations) Power: 5 HP Voltage : 220 Volts Current : 19.6 Amps Type : NEMA 56 . Heater Power : 2400 Watts Current : 10 Amps Thermistor : Overheat Cutoff Timer : 6 Hours . Materials Tubing : Aluminum square and round tubing Enclosure : Rip-stop polyester vinyl